HAHA! commit

Initial commit
2013-11-30 21:22:19 +01:00
commit 2e9b87dab6
26 changed files with 4842 additions and 0 deletions
@@ -0,0 +1,123 @@
+     
+#include <WaspXBee802.h>
+#include <WaspFrame.h>    // CRITICAL INFRASTRUCTURE Frames defined in WaspFrame.h -- github --- XXXX
+
+/*
+CRITICAL INFRASTRUCTURE {values}:
+SENSOR_CI0     <int>
+SENSOR_CI1     <int>
+SENSOR_CI2     <int>
+SENSOR_CI3     <int>
+SENSOR_CI4     <int>
+*/
+
+#define SENSOR_PIN ANALOG1 // PIN for the ADC reading
+
+// declare ADC reading variable
+int delay_reading = 500;
+int reading = 0;
+
+
+// declare packet
+packetXBee* packet;
+
+// mac address of this mote
+char macHigh[10];
+char macLow[11];
+
+
+void setup() {
+    
+  // blink
+  Utils.setLED(LED0, LED_ON);
+  Utils.setLED(LED1, LED_ON);
+  delay(2000);
+  Utils.setLED(LED0, LED_OFF);
+  Utils.setLED(LED1, LED_OFF);
+  
+  // setup radio + MAC
+  xbee802.ON();
+  delay(1000);
+  xbee802.flush();
+  
+  // Get the XBee MAC address
+  int counter = 0;
+  while((xbee802.getOwnMac()!=0) && (counter<12))
+  {
+    xbee802.getOwnMac();
+    counter++;
+  }
+
+  // convert mac address from array to string
+  Utils.hex2str(xbee802.sourceMacHigh, macHigh, 4);
+  Utils.hex2str(xbee802.sourceMacLow,  macLow,  4);  
+
+  // DEBUG: print MAC to console  
+  USB.ON();
+  USB.print("mac address:");
+  USB.print(macHigh);
+  USB.println(macLow);
+  USB.OFF();   
+  
+  //B.0 set mote id (16-Byte max)
+  //frame.setID("CRITICAL-0");	    
+
+}
+
+
+void loop() {
+
+// A. ADC READING 
+  
+  //A.1 PWR ON SENSOR
+  PWR.setSensorPower(SENS_3V3,SENS_ON);
+  Utils.setLED(LED1, LED_ON);
+
+  //A.2 READ VALUE
+  reading = analogRead(SENSOR_PIN);
+  
+  //A.3 PWR OFF SENSOR
+  PWR.setSensorPower(SENS_3V3,SENS_OFF);
+  
+// B. BROADCAST PACKET
+
+  //B.1 create ASCII frame
+  frame.createFrame(ASCII,"CRITICAL-0");
+    
+  //B.1.1 add CRITICAL INFRASTRUCTURE sensor descriptors
+  frame.addSensor(SENSOR_MAC, macLow);                // MAC
+  frame.addSensor(SENSOR_CI0, reading);               // CI0 <------------------------- IMPORTANT! (see nomenclature in the header of this file)
+  frame.addSensor(SENSOR_BAT, PWR.getBatteryLevel()); // Battery level
+  
+  //DEBUG: print frame to console
+  frame.showFrame();
+  
+  //B.2 create packet
+  packet=(packetXBee*) calloc(1,sizeof(packetXBee));   // memory allocation
+  packet->mode=BROADCAST;                              // set Broadcast mode
+  
+  //B.3 send packet
+  // radio ON
+  xbee802.ON();  
+  // sets Destination parameters [000000000000FFFF -> Broadcast]
+  xbee802.setDestinationParams(packet, "000000000000FFFF", frame.buffer, frame.length); 
+  // send 
+  xbee802.sendXBee(packet);
+  
+  //B.4 check status (DEBUG)
+  if(xbee802.error_TX == 0) {
+    USB.println(F("TX OK"));
+  } else {
+    USB.println(F("TX ERROR"));
+  }
+  
+  //B.5 free memory
+  free(packet);
+  packet = NULL;
+  
+//C. Delay
+
+  delay(1000);
+
+}
+
@@ -0,0 +1,58 @@
+#define SENSOR_PIN ANALOG1
+
+int delay_reading = 500;
+int reading = 0;
+char reading_buff[20];
+
+// define folder and file to store data
+char* logfile="log.csv";
+
+
+void setup() {
+  
+  USB.ON();
+  
+  SD.ON();
+  //SD.mkdir(path);
+
+  // delete file
+  if(SD.del(logfile)) {
+    USB.println(F("file deleted"));
+  } else {
+    USB.println(F("file NOT deleted"));
+  }
+  
+  // create file
+  if(SD.create(logfile)) {
+    USB.println(F("file created"));
+  } else {
+    USB.println(F("file NOT created"));
+  }
+  
+   
+}
+
+
+void loop() {
+  
+  //PWR ON SENSOR
+  PWR.setSensorPower(SENS_3V3,SENS_ON);
+  Utils.setLED(LED1, LED_ON);
+
+  //READ VALUE
+  reading = analogRead(SENSOR_PIN);
+  delay(delay_reading / 2);
+  
+  //PWR OFF SENSOR
+  Utils.setLED(LED1, LED_OFF);
+  PWR.setSensorPower(SENS_3V3,SENS_OFF);
+  
+  //WRITE DATA TO FILE (may need some convertion here...)
+  Utils.long2array(reading, reading_buff);
+  SD.appendln(logfile, reading_buff);
+  
+  USB.println(reading_buff);
+  
+  delay(delay_reading / 2);
+}
+
@@ -0,0 +1,58 @@
+#include <WaspSensorPrototyping_v20.h>
+
+int delay_reading = 500;
+
+char reading_buff[20];
+
+// define folder and file to store data
+char* logfile="log.csv";
+
+void setup() {
+  
+  USB.ON();
+  
+  SD.ON();
+
+  // delete file
+  if(SD.del(logfile)) {
+    USB.println(F("file deleted"));
+  } else {
+    USB.println(F("file NOT deleted"));
+  }
+  
+  // create file
+  if(SD.create(logfile)) {
+    USB.println(F("file created"));
+  } else {
+    USB.println(F("file NOT created"));
+  }
+  
+  delay(100);
+  
+  // Sensor board
+  SensorProtov20.ON();
+  // RTC
+  RTC.ON();
+   
+}
+
+
+void loop() {
+  
+  Utils.setLED(LED1, LED_ON);
+  
+  float adc = SensorProtov20.readADC();
+  
+  Utils.float2String(adc, reading_buff, 6);
+      
+  delay(delay_reading / 2);
+  
+  Utils.setLED(LED1, LED_OFF);
+
+  SD.appendln(logfile, reading_buff);
+  
+  USB.println(reading_buff);
+  
+  delay(delay_reading / 2);
+}
+
@@ -0,0 +1,53 @@
+#define SENSOR_PIN ANALOG2
+
+int delay_reading = 100;
+char reading_buff[20];
+
+// define folder and file to store data
+char* logfile="log.csv";
+
+
+void setup() {
+  
+  USB.ON();
+  
+  SD.ON();
+
+  // delete file
+  if(SD.del(logfile)) {
+    USB.println(F("file deleted"));
+  } else {
+    USB.println(F("file NOT deleted"));
+  }
+  
+  // create file
+  if(SD.create(logfile)) {
+    USB.println(F("file created"));
+  } else {
+    USB.println(F("file NOT created"));
+  }
+  
+  // accelerometer
+  ACC.ON();
+   
+}
+
+
+void loop() {
+  
+  Utils.setLED(LED1, LED_ON);
+    
+  sprintf(reading_buff, "%d,%d,%d", ACC.getX(), ACC.getY(), ACC.getZ());
+  
+  delay(delay_reading / 2);
+  
+  //PWR OFF SENSOR
+  Utils.setLED(LED1, LED_OFF);
+
+  SD.appendln(logfile, reading_buff);
+  
+  USB.println(reading_buff);
+  
+  delay(delay_reading / 2);
+}
+
@@ -0,0 +1,55 @@
+#define SENSOR_PIN ANALOG2
+
+int delay_reading = 100;
+char reading_buff[20];
+
+// define folder and file to store data
+char* logfile="log.csv";
+
+
+void setup() {
+  
+  USB.ON();
+  
+  SD.ON();
+
+  // delete file
+  if(SD.del(logfile)) {
+    USB.println(F("file deleted"));
+  } else {
+    USB.println(F("file NOT deleted"));
+  }
+  
+  // create file
+  if(SD.create(logfile)) {
+    USB.println(F("file created"));
+  } else {
+    USB.println(F("file NOT created"));
+  }
+  
+  // RTC
+  RTC.ON();
+   
+}
+
+
+void loop() {
+  
+  Utils.setLED(LED1, LED_ON);
+  
+  float temp = RTC.getTemperature();
+  
+  Utils.float2String(temp, reading_buff, 3);
+      
+  delay(delay_reading / 2);
+  
+  //PWR OFF SENSOR
+  Utils.setLED(LED1, LED_OFF);
+
+  SD.appendln(logfile, reading_buff);
+  
+  USB.println(reading_buff);
+  
+  delay(delay_reading / 2);
+}
+