gauthiier/M-M-M
1
0
Fork 0
Code Issues 11 Pull Requests Releases Wiki Activity

updated music library documentation sketch and keywords

Browse Source
This commit is contained in:
Jakob Bak 2013-05-21 15:30:44 +02:00
parent e33335f379
commit 3dc691cb98
2 changed files with 33 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
software/lib/MMM/examples/Music/_0_MUSIC_LIBRARY_DOCUMENTATION/_0_MUSIC_LIBRARY_DOCUMENTATION.ino
View File

@ -12,19 +12,26 @@
// If you copy a function from here to your arduino sketch, just change the word "float", "uint8_t", etc into the
// variable name that you uses in your sketch.
// PREPROCESSING COMMANDS
// PRE-PROCESSING COMMANDS
#define NUM_OSCILLATORS 3 // define the use of 1, 2 or 3 oscillators
#define BIT_DEPTH 12 // define the bit depth resolution of 8 or 12 bit waveforms
#define MIDI // tell the system you will be using the MIDI part of the sound engine
#define MIDI_CHANNEL // set the MIDI channel to listen to. Between 1 and 16
#define MIDI_CHANNEL 1 // set the MIDI channel to listen to. Between 1 and 16
#define FM // tell the library to use the FM synthesis mode
#include <Music.h>
// INITIALIZERS
// Use this to start the synth engine. It defaults to a sine tone at 110Hz, no envelope and no detune.
// Use this in the setup() function to start the synth engine.
// It defaults to a sine tone at 110Hz, no envelope and no detune.
Music.init();
// Use this to start the MIDI engine. It defaults to a sine tone at 110Hz, no envelope and no detune.
// Use this in the setup() function to start the MIDI engine. It sets up the serial communication.
Midi.init();
// MIDI FUNCTIONS
Midi.checkMidi() // put this function in the loop() function in your
// Arduino sketch to check for incoming MIDI activity
// FREQUENCY AND DETUNE FUNCTIONS
// Use these functions to set the frequency and detune parameters of the synth.
@ -39,6 +46,7 @@ Music.setDetune3(float); //
Music.setSemitone1(int8_t); // Set the semitone offset of base frequency in musical halftones relative to base frequency
Music.setSemitone2(int8_t); // Goes from -24 halftones to +24 halftones
Music.setSemitone3(int8_t);
Music.setFM2(uint8_t); // Set the amount of frequency modulation (FM) on oscillator2.
// WAVEFORM FUNCTIONS
@ -116,7 +124,3 @@ Music.setDecay(uint8_t); // 0 - 127
Music.setSustain(uint8_t); // 0 - 127
Music.setRelease(uint8_t); // 0 - 127
// MIDI FUNCTIONS
Midi.checkMidi() // put this function in the loop() function in your
// Arduino sketch to check for incoming MIDI activity

22
software/lib/MMM/keywords.txt
View File

@ -59,6 +59,7 @@ direction KEYWORD2
stop KEYWORD2
start KEYWORD2
restart KEYWORD2
setFM2 KEYWORD2
#######################################
@ -68,4 +69,23 @@ restart KEYWORD2
NUM_OSCILLATORS LITERAL1
BIT_DEPTH LITERAL1
MIDI LITERAL1
MIDI_CHANNEL LITERAL1
MIDI_CHANNEL LITERAL1
FM LITERAL1
CFO LITERAL1
SINE LITERAL1
SQUARE LITERAL1
PULSE LITERAL1
TRIANGLE LITERAL1
SAW LITERAL1
FUZZ LITERAL1
DIGI1 LITERAL1
DIGI2 LITERAL1
DIGI3 LITERAL1
DIGI4 LITERAL1
NOISE LITERAL1
DIGI6 LITERAL1
TAN1 LITERAL1
TAN2 LITERAL1
TAN3 LITERAL1
TAN4 LITERAL1