commit prior to trying to revert to david's branches

config.refindx

@@ -36,9 +36,4 @@
         <acquiretime_colormulti>        40      </acquiretime_colormulti>
         <acquiretime_diffnoise>         30      </acquiretime_diffnoise>
     </analysis_time>
-    
-    <relaxrate>
-        <treshold>51</treshold>
-    </relaxrate>
-    
 </config>

src/RelaxRateAnalysis.cpp

@@ -12,7 +12,6 @@ using Poco::Thread;
 
 #define NUMBER_RUNS     1
 #define ACQUIRE_TIME    20
-#define TRESHOLD        80
 
 void RelaxRateAnalysis::setup(int camWidth, int camHeight)
 {
@@ -24,9 +23,6 @@ void RelaxRateAnalysis::setup(int camWidth, int camHeight)
     acq_run_time = RefractiveIndex::XML.getValue("config:analysis_time:acquiretime_relaxrate", ACQUIRE_TIME);
     cout << "ACQUIRE_TIME RelaxRateAnalysis " << acq_run_time << endl;
     
-    _treshold = RefractiveIndex::XML.getValue("config:relaxrate:treshold", TRESHOLD);
-    cout << "TRESHOLD RelaxRateAnalysis " << _treshold << endl;
-    
     //int acq_run_time = 20;   // 20 seconds of acquiring per run
     
     DELTA_T_SAVE = 2*(10*acq_run_time/2); // for 20 seconds, we want this to be around 200 files
@@ -128,26 +124,63 @@ void RelaxRateAnalysis::synthesise()
     //cout << "IResponseAnalysis::saving synthesis...\n";
     if(_state == STATE_STOP) return;
     
-    cvContourFinderVect.clear();
+    for(float i=1;i<_saved_filenames_analysis.size()-1;i++){
         
-    for(float i=1;i<_saved_filenames_analysis.size();i++){
+        //cout << "IResponseAnalysis::synthesis FOR LOOP...\n";
+        
+        //cout << "_saved_filenames_analysis[i]" << _saved_filenames_analysis[i] << endl;
         
         if(_state == STATE_STOP) return;
         
+        if(!image1.loadImage(_saved_filenames_analysis[i])){
+            //couldn't load image
+            cout << "didn't load image" << endl;
+        } 
+        
         if(image1.loadImage(_saved_filenames_analysis[i])){
+            //cout << "LOADED image1!!!" << endl;
+            if(image5.loadImage(_saved_filenames_analysis[i+1])){
                 
-            ///////////////////////// PROCESS THE SAVED CAMERA IMAGES OF SHIT TO THE IMAGES //////////////////////////
+                ///////////////////////// PROCESS THE SAVED CAMERA IMAGES OF SHIT TO THE IMAGES //////////////////////////
                 
-            cvColorImage1.setFromPixels(image1.getPixels(), image1.width, image1.height);            
+                cvColorImage1.setFromPixels(image1.getPixels(), image1.width, image1.height);
-            cvGrayDiff1 = cvColorImage1;
+                cvColorImage2.setFromPixels(image5.getPixels(), image5.width, image5.height);
-            cvGrayDiff1.threshold(_treshold);
                 
-            rfiCvContourFinder* cf = new rfiCvContourFinder();
+                cvGrayImage1 = cvColorImage1;
+                cvGrayImage2 = cvColorImage2;
                 
-            cf->findContours(cvGrayDiff1, 20, (image1.width * image1.height) / 4, 25, true);
+                cvGrayDiff1.absDiff(cvGrayImage2, cvGrayImage1);                
+                cvGrayDiff1.threshold(80);
                 
-            cvContourFinderVect.push_back(cf);
+                cvContourFinder1.findContours(cvGrayDiff1, 20, (image1.width * image1.height) / 4, 25, true);
                                 
+                
+                /////////////////////////////////// SAVE TO DISK IN THE SYNTHESIS FOLDER ////////////////////////////////
+                string file_name;
+                
+                file_name = ofToString(_synth_save_cnt, 2)+"_RelaxRateAnalysis_"+ofToString(_run_cnt,2)+".jpg";
+                
+                
+                //<---- THE OLD WAY OF SAVING - works on OSX but generates BLACK FRAMES on WINDOWS ---->
+                // ofSaveImage(cvGrayImage1.getPixelsRef(),_whole_file_path_synthesis+"/"+file_name, OF_IMAGE_QUALITY_BEST);
+                
+                
+                //<---- NEW SAVING - seems to fix WINDOWS saving out BLACK FRAMES PROBLEM ---->
+                //ofImage image;
+                //image.allocate(cvGrayDiff1.width, cvGrayDiff1.height, OF_IMAGE_GRAYSCALE);
+                
+                //*** This needs to be here for OSX of we get a BAD ACCESS ERROR. DOES IT BREAK WINDOWS? ***//
+                //image.setUseTexture(false);  
+                
+                //image.setFromPixels(cvGrayDiff1.getPixels(), cvGrayDiff1.width, cvGrayDiff1.height, OF_IMAGE_GRAYSCALE);
+                //image.saveImage(_whole_file_path_synthesis+"/"+file_name);
+                
+                //_saved_filenames_synthesis.push_back(_whole_file_path_synthesis+"/"+file_name);
+          
+                // <--- REALLY NEW SAVING METHOD --- 26 feb 2012 --- consolidated the save function into Abstract Analysis> ///
+                saveImageSynthesis(file_name, &cvGrayDiff1, OF_IMAGE_GRAYSCALE);
+                _synth_save_cnt++;
+            }
         }
     }
     
@@ -160,27 +193,31 @@ void RelaxRateAnalysis::synthesise()
 void RelaxRateAnalysis::displayresults()
 {
     
-    cvContourFinderVectDisplay.clear();
+    for(float i=1;i<_saved_filenames_synthesis.size();i++){
-    
-    for(int i=1;i<cvContourFinderVect.size();i++){
         
         if(_state == STATE_STOP) return;
         
-        
         //cout << "_saved_filenames_analysis[i] - " << _saved_filenames_synthesis[i] << endl;
         
         while(!_image_shown){
             Thread::sleep(2);
-            if(_state == STATE_STOP) return;
             //cout << "!_image_shown" << endl;
         }
         
-        cvContourFinderVectDisplay.push_back(cvContourFinderVect[i]);    
+        if(!image3.loadImage(_saved_filenames_synthesis[i])){
-        _show_image = true;
+            //couldn't load image
-        _image_shown = false;
+            // cout << "didn't load image" << endl;
+        } 
         
+        if(image3.loadImage(_saved_filenames_synthesis[i])){
+            image3.loadImage(_saved_filenames_synthesis[i]);
+            //cout << "_show_image = true;" << endl;
+            _show_image = true;
+            _image_shown = false;
+        }
     }
 
+    
 }
 
 
@@ -191,6 +228,9 @@ void RelaxRateAnalysis::draw()
     switch (_state) {
         case STATE_ACQUIRING:
         {
+            /// *** TODO  *** ///
+            // still need to deal with latency frames here - i.e.: there are frames
+            /// *** TODO  *** ///
            
             if (_frame_cnt < _frame_cnt_max)
             {
@@ -321,10 +361,15 @@ void RelaxRateAnalysis::draw()
             
             if (_show_image)
             {  
-                for(int i=0;i<cvContourFinderVectDisplay.size();i++){
+                //cout << "_show_image...\n" << endl;
-                    cvContourFinderVectDisplay[i]->draw(0,0, ofGetWidth(), ofGetHeight());
-                }
                 
+                ofEnableAlphaBlending();
+                
+                ofSetColor(255, 255, 255);
+                image2.setFromPixels(image3.getPixels(),image3.width,image3.height, OF_IMAGE_GRAYSCALE);
+                image2.draw(0,0, ofGetWidth(), ofGetHeight());
+                
+                ofDisableAlphaBlending();
             }
             
             // display results of the synthesis

src/RelaxRateAnalysis.h

@@ -5,12 +5,8 @@
 
 #include "Poco/Timer.h"
 
-#include "rfiCvContourFinder.h"
-
 #include "ofxOpenCv.h"
 
-
-
 class RelaxRateAnalysis : public AbstractAnalysis
 {
 public:
@@ -35,8 +31,6 @@ protected:
     int     _run_cnt, _save_cnt, _synth_save_cnt, _anim_cnt;
     float   c, _frame_cnt, _frame_cnt_max, _anim_cnt_max;
     
-    int     _treshold;
-    
     bool _show_image, _image_shown;
     ofImage         image1;
     ofImage         image2; 
@@ -60,7 +54,6 @@ protected:
     ofxCvGrayscaleImage 	cvGrayImage3;
     ofxCvGrayscaleImage 	cvGrayImage4;
     
-    vector<rfiCvContourFinder*>      cvContourFinderVect;
+    ofxCvContourFinder      cvContourFinder1;
-    vector<rfiCvContourFinder*>      cvContourFinderVectDisplay;
 
 };

src/rficv/rfiCvContourFinder.cpp

@@ -1,211 +0,0 @@
-
-#include "rfiCvContourFinder.h"
-
-
-
-//--------------------------------------------------------------------------------
-static bool sort_carea_compare( const CvSeq* a, const CvSeq* b) {
-	// use opencv to calc size, then sort based on size
-	float areaa = fabs(cvContourArea(a, CV_WHOLE_SEQ));
-	float areab = fabs(cvContourArea(b, CV_WHOLE_SEQ));
-
-    //return 0;
-	return (areaa > areab);
-}
-
-
-
-
-//--------------------------------------------------------------------------------
-rfiCvContourFinder::rfiCvContourFinder() {
-    _width = 0;
-    _height = 0;
-	myMoments = (CvMoments*)malloc( sizeof(CvMoments) );
-	reset();
-}
-
-//--------------------------------------------------------------------------------
-rfiCvContourFinder::~rfiCvContourFinder() {
-	free( myMoments );
-}
-
-//--------------------------------------------------------------------------------
-void rfiCvContourFinder::reset() {
-    cvSeqBlobs.clear();
-    blobs.clear();
-    nBlobs = 0;
-}
-
-//--------------------------------------------------------------------------------
-int rfiCvContourFinder::findContours( ofxCvGrayscaleImage&  input,
-									  int minArea,
-									  int maxArea,
-									  int nConsidered,
-									  bool bFindHoles,
-                                      bool bUseApproximation) {
-
-    // get width/height disregarding ROI
-    IplImage* ipltemp = input.getCvImage();
-    _width = ipltemp->width;
-    _height = ipltemp->height;
-
-	reset();
-
-	// opencv will clober the image it detects contours on, so we want to
-    // copy it into a copy before we detect contours.  That copy is allocated
-    // if necessary (necessary = (a) not allocated or (b) wrong size)
-	// so be careful if you pass in different sized images to "findContours"
-	// there is a performance penalty, but we think there is not a memory leak
-    // to worry about better to create mutiple contour finders for different
-    // sizes, ie, if you are finding contours in a 640x480 image but also a
-    // 320x240 image better to make two rfiCvContourFinder objects then to use
-    // one, because you will get penalized less.
-
-	if( inputCopy.getWidth() == 0 ) {
-        inputCopy.setUseTexture(false);
-		inputCopy.allocate( _width, _height );
-	} else if( inputCopy.getWidth() != _width || inputCopy.getHeight() != _height ) {
-        // reallocate to new size
-        inputCopy.clear();
-        inputCopy.setUseTexture(false);
-        inputCopy.allocate( _width, _height );
-	}
-
-    inputCopy.setROI( input.getROI() );
-    inputCopy = input;
-
-	CvSeq* contour_list = NULL;
-	contour_storage = cvCreateMemStorage( 1000 );
-	storage	= cvCreateMemStorage( 1000 );
-
-	CvContourRetrievalMode  retrieve_mode
-        = (bFindHoles) ? CV_RETR_LIST : CV_RETR_EXTERNAL;
-	cvFindContours( inputCopy.getCvImage(), contour_storage, &contour_list,
-                    sizeof(CvContour), retrieve_mode, bUseApproximation ? CV_CHAIN_APPROX_SIMPLE : CV_CHAIN_APPROX_NONE );
-	CvSeq* contour_ptr = contour_list;
-
-	// put the contours from the linked list, into an array for sorting
-	while( (contour_ptr != NULL) ) {
-		float area = fabs( cvContourArea(contour_ptr, CV_WHOLE_SEQ) );
-		if( (area > minArea) && (area < maxArea) ) {
-            cvSeqBlobs.push_back(contour_ptr);
-		}
-		contour_ptr = contour_ptr->h_next;
-	}
-
-
-	// sort the pointers based on size
-	if( cvSeqBlobs.size() > 1 ) {
-        sort( cvSeqBlobs.begin(), cvSeqBlobs.end(), sort_carea_compare );
-	}
-
-
-	// now, we have cvSeqBlobs.size() contours, sorted by size in the array
-    // cvSeqBlobs let's get the data out and into our structures that we like
-	for( int i = 0; i < MIN(nConsidered, (int)cvSeqBlobs.size()); i++ ) {
-		blobs.push_back( ofxCvBlob() );
-		float area = cvContourArea( cvSeqBlobs[i], CV_WHOLE_SEQ );
-		CvRect rect	= cvBoundingRect( cvSeqBlobs[i], 0 );
-		cvMoments( cvSeqBlobs[i], myMoments );
-
-		blobs[i].area                     = fabs(area);
-		blobs[i].hole                     = area < 0 ? true : false;
-		blobs[i].length 			      = cvArcLength(cvSeqBlobs[i]);
-		blobs[i].boundingRect.x           = rect.x;
-		blobs[i].boundingRect.y           = rect.y;
-		blobs[i].boundingRect.width       = rect.width;
-		blobs[i].boundingRect.height      = rect.height;
-		blobs[i].centroid.x 			  = (myMoments->m10 / myMoments->m00);
-		blobs[i].centroid.y 			  = (myMoments->m01 / myMoments->m00);
-
-		// get the points for the blob:
-		CvPoint           pt;
-		CvSeqReader       reader;
-		cvStartReadSeq( cvSeqBlobs[i], &reader, 0 );
-
-    	for( int j=0; j < cvSeqBlobs[i]->total; j++ ) {
-			CV_READ_SEQ_ELEM( pt, reader );
-            blobs[i].pts.push_back( ofPoint((float)pt.x, (float)pt.y) );
-		}
-		blobs[i].nPts = blobs[i].pts.size();
-
-	}
-
-    nBlobs = blobs.size();
-
-	// Free the storage memory.
-	// Warning: do this inside this function otherwise a strange memory leak
-	if( contour_storage != NULL ) { cvReleaseMemStorage(&contour_storage); }
-	if( storage != NULL ) { cvReleaseMemStorage(&storage); }
-
-	return nBlobs;
-
-}
-
-//--------------------------------------------------------------------------------
-void rfiCvContourFinder::draw( float x, float y, float w, float h ) {
-
-    float scalex = 0.0f;
-    float scaley = 0.0f;
-    if( _width != 0 ) { scalex = w/_width; } else { scalex = 1.0f; }
-    if( _height != 0 ) { scaley = h/_height; } else { scaley = 1.0f; }
-
-    if(bAnchorIsPct){
-        x -= anchor.x * w;
-        y -= anchor.y * h;
-    }else{
-        x -= anchor.x;
-        y -= anchor.y;
-    }
-
-    ofPushStyle();
-    glPushMatrix();
-    glTranslatef( x, y, 0.0 );
-    glScalef( scalex, scaley, 0.0 );
-	ofSetHexColor(0xFFFFFF);
-
-	for( int i=0; i<(int)blobs.size(); i++ ) {
-		ofNoFill();
-		ofBeginShape();
-		for( int j=0; j<blobs[i].nPts; j++ ) {
-			ofVertex( blobs[i].pts[j].x, blobs[i].pts[j].y );
-		}
-		ofEndShape();
-
-	}
-	glPopMatrix();
-	ofPopStyle();
-}
-
-
-//----------------------------------------------------------
-void rfiCvContourFinder::draw(const ofPoint & point){
-	draw(point.x, point.y);
-}
-
-//----------------------------------------------------------
-void rfiCvContourFinder::draw(const ofRectangle & rect){
-	draw(rect.x, rect.y, rect.width, rect.height);
-}
-
-//--------------------------------------------------------------------------------
-void rfiCvContourFinder::setAnchorPercent( float xPct, float yPct ){
-    anchor.x = xPct;
-    anchor.y = yPct;
-    bAnchorIsPct = true;
-}
-
-//--------------------------------------------------------------------------------
-void rfiCvContourFinder::setAnchorPoint( int x, int y ){
-    anchor.x = x;
-    anchor.y = y;
-    bAnchorIsPct = false;
-}
-
-//--------------------------------------------------------------------------------
-void rfiCvContourFinder::resetAnchor(){
-    anchor.set(0,0);
-    bAnchorIsPct = false;
-}
-
-

src/rficv/rfiCvContourFinder.h

@@ -1,73 +0,0 @@
-/*
-* rfiCvContourFinder.h
-*
-* Finds white blobs in binary images and identifies
-* centroid, bounding box, area, length and polygonal contour
-* The result is placed in a vector of ofxCvBlob objects.
-*
-*/
-
-#ifndef RFI_CV_CONTOUR_FINDER
-#define RFI_CV_CONTOUR_FINDER
-
-
-
-#include "ofxCvConstants.h"
-#include "ofxCvBlob.h"
-#include "ofxCvGrayscaleImage.h"
-#include <algorithm>
-
-class rfiCvContourFinder : public ofBaseDraws {
-
-  public:
-  
-    vector<ofxCvBlob>  blobs;
-    int                nBlobs;    // DEPRECATED: use blobs.size() instead
-      
-
-    rfiCvContourFinder();
-    virtual  ~rfiCvContourFinder();
-    
-	virtual float getWidth() { return _width; };    //set after first findContours call
-	virtual float getHeight() { return _height; };  //set after first findContours call
-    
-    virtual int  findContours( ofxCvGrayscaleImage& input,
-                               int minArea, int maxArea,
-                               int nConsidered, bool bFindHoles,
-                               bool bUseApproximation = true);
-                               // approximation = don't do points for all points 
-                               // of the contour, if the contour runs
-                               // along a straight line, for example...
-
-    virtual void  draw() { draw(0,0, _width, _height); };
-    virtual void  draw( float x, float y ) { draw(x,y, _width, _height); };
-    virtual void  draw( float x, float y, float w, float h );
-	virtual void  draw(const ofPoint & point);
-	virtual void  draw(const ofRectangle & rect);
-	virtual void setAnchorPercent(float xPct, float yPct);
-    virtual void setAnchorPoint(int x, int y);
-	virtual void resetAnchor();      
-    //virtual ofxCvBlob  getBlob(int num);
-
-
-
-  protected:
-
-    int  _width;
-    int  _height;
-    ofxCvGrayscaleImage     inputCopy;
-    CvMemStorage*           contour_storage;
-    CvMemStorage*           storage;
-    CvMoments*              myMoments;
-    vector<CvSeq*>          cvSeqBlobs;  //these will become blobs
-    
-    ofPoint  anchor;
-    bool  bAnchorIsPct;      
-
-    virtual void reset();
-
-};
-
-
-
-#endif