gauthiier/M-M-M
1
0
Fork 0
Code Issues 11 Pull Requests Releases Wiki Activity

updated music library documentation sketch and keywords

Browse Source
This commit is contained in:
Jakob Bak
2013-05-21 15:30:44 +02:00
parent e33335f379
commit 3dc691cb98
2 changed files with 33 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files
software/lib/MMM/examples/Music/_0_MUSIC_LIBRARY_DOCUMENTATION/_0_MUSIC_LIBRARY_DOCUMENTATION.ino
+12 -8
View File
@@ -12,19 +12,26 @@
// If you copy a function from here to your arduino sketch, just change the word "float", "uint8_t", etc into the
// variable name that you uses in your sketch.
// PREPROCESSING COMMANDS
// PRE-PROCESSING COMMANDS
#define NUM_OSCILLATORS 3 // define the use of 1, 2 or 3 oscillators
#define BIT_DEPTH 12 // define the bit depth resolution of 8 or 12 bit waveforms
#define MIDI // tell the system you will be using the MIDI part of the sound engine
#define MIDI_CHANNEL // set the MIDI channel to listen to. Between 1 and 16
#define MIDI_CHANNEL 1 // set the MIDI channel to listen to. Between 1 and 16
#define FM // tell the library to use the FM synthesis mode
#include <Music.h>
// INITIALIZERS
// Use this to start the synth engine. It defaults to a sine tone at 110Hz, no envelope and no detune.
// Use this in the setup() function to start the synth engine.
// It defaults to a sine tone at 110Hz, no envelope and no detune.
Music.init();
// Use this to start the MIDI engine. It defaults to a sine tone at 110Hz, no envelope and no detune.
// Use this in the setup() function to start the MIDI engine. It sets up the serial communication.
Midi.init();
// MIDI FUNCTIONS
Midi.checkMidi() // put this function in the loop() function in your
// Arduino sketch to check for incoming MIDI activity
// FREQUENCY AND DETUNE FUNCTIONS
// Use these functions to set the frequency and detune parameters of the synth.
@@ -39,6 +46,7 @@ Music.setDetune3(float); //
Music.setSemitone1(int8_t); // Set the semitone offset of base frequency in musical halftones relative to base frequency
Music.setSemitone2(int8_t); // Goes from -24 halftones to +24 halftones
Music.setSemitone3(int8_t);
Music.setFM2(uint8_t); // Set the amount of frequency modulation (FM) on oscillator2.
// WAVEFORM FUNCTIONS
@@ -116,7 +124,3 @@ Music.setDecay(uint8_t); // 0 - 127
Music.setSustain(uint8_t); // 0 - 127
Music.setRelease(uint8_t); // 0 - 127
// MIDI FUNCTIONS
Midi.checkMidi() // put this function in the loop() function in your
// Arduino sketch to check for incoming MIDI activity